+380 44 531-14-77 | Contacts | Sitemap
Uniteh+
Ukr | Rus | Eng
Home  //  Equipments  //  Terminal CT-120m

Terminal CT-120m

1.  General information about good

The video terminal CT-120m (terminal in future) is executed on the base of monitor of mono SVGA, CU is built-in in which. A terminal is intended for the operative input of alphanumerical information in a server and showing the incoming alphanumerical and graphic information from the server. During the work in the graphics mode a terminal emulate the ordinary alphanumerical mode, but it is possible to show the graphic information on the screen in certain the formats.

2. General technical information

2.1. Image description:

  • size of the tube bias – 14 inches;
  • definition -  800 ´ 600 pixels;
  • format of page - 25 lines for 80 characters, or 43 lines for 132 characters.

2.2. Keyboard description:

  • number of keys - 101/104
  • register switch (Roman/Russian)
  • programming of the keys:
    • for functional keyboard - sequences up to 16 bytes;
    • for main keyboard - 1 byte per key.

2.3. Communication interfaces:

  • Interface of connection with a server:
    • RS-232 without the chain of the modem cintrol, data rate up to 115 Kbps;
    • IRPS (current loop -  20 mA), data rate up to 115 Kbps;
  • interface of connection with printer - CENTRONICS.

2.4. Terminal work modes:

  • ANSI;
  • PC TERM;
  • graphic.

2.5. The feed of terminal is carried out from the network of alternating current frequency 50/60Hz and by tension 220V  +10/-15%. The consumption of terminal is not more than 100 Watts.

2.6. A terminal is intended for exploitation in the followings climatic terms:

  • temperature of surrounding air - 25 ±10 °C;
  • relative humidity - 60 ±15 %;
  • atmospheric pressure – from 84 to 107 K pascal.

2.7. Terminal size (without a keyboard) - less than 370´385´385 mm´mm´mm

2.8. Terminal weight (without a keyboard) - less than – 9 kg.

3. Complete set of delivery

In the the complete set of delivery is included:

  • Reflection equipment (TVS monitor) with built-in CU - 1 item;
  • PC AT keyboard (101/104 key)- 1 item;
  • Feed cable - 1 item;
  • Cutoff point of interface cable - 1 item;
  • Manual- 1 item.

CU terminal allow to work with the coloured video monitor, that allows to realize the supplying with the coloured video terminal on a concordance with a customer.


© 2005-2019, Copyright Uniteh + +380 44 531-14-77